How To Solve DNS Server is Not Responding

Learn How To Solve DNS Server is Not Responding. Sometimes a computer that is running on Windows 7 will receive the following error message:

“Your computer appears to be correctly configured, but the device or resource (DNS server) is not responding”. When the issue occurs, you cannot connect to Internet.

The Domain Name Server (DNS) is a server that translates the website’s addresses so that your browser can connect to them. Regularly, you can lose connection to the server, either though corrupt settings or problems on the server’s end.

How To Solve DNS Server Not Responding Error

First narrow down the problem

Verifying Your Connection.
–    Connect another device to the network. Connect another device to your router, either wired or wirelessly, to identify if the problem is your computer.
Try to access a webpage from the second device. Still receiving DNS errors, then the problem lies in your router or with your ISP. Connecting to the website, then the problem is coming from the first computer.
–    Power cycles your modem and router.
–    if you’re using a mobile device you can go to >settings>mobile data and reset the configurations.
–    Try a different browser.
–    Disable any extra connections

READ:   How to Fix Error 0x80048830 in Windows 10 Mail App

How to solve your computer appears to be correctly configured, but the device or resource (DNS server) is not responding

Method 1: Restart the router

•    Unplug the power connector from the back of the router.
•    Wait about 10 seconds
•    Then reconnect the power cord to the router.

Method 2: Use the Ipconfig command-line tool

Use the Ipconfig command-line tool:
1.    Click Start, type command prompt in the Search Programs and files box, right-click Command Prompt, and then click Run as administrator.
2.    At the command prompt, type the following commands. Press Enter after each command.
ipconfig /flushdns
ipconfig /registerdns
ipconfig /release
ipconfig /renew

Method 3: Configure the TCP/IP settings

Configure the TCP/IP settings:
1.    Click Start, Click Control Panel.
2.    Click View network status and tasks under Networking and Internet.
3.    Click Change adapter settings.
4.    Right-click Local Area Connection and then click Properties.
5.    Select Internet Protocol Version 6 (TCP/IPv6), and then click Properties.
6.    Select Obtain an IPv6 address automatically, select Obtain DNS servers address automatically, and then click OK.
7.    Select Internet Protocol Version 4 (TCP/IPv4), and then click Properties.
8.    Select Obtain an IP address automatically, select Obtain DNS servers address automatically, and then click OK.

READ:   How to Fix Error code 0x80073d0b on Windows 10 phones

Method 4: Other Methods

If the three methods above don’t work for you then try some other methods listed below.
–    Disable Your Firewall
Disable your firewall and check for the error.
–    Disable any Extra Connection

Usually windows install extra connections even if you never use them. Have only the connections that you use regularly and remove the other connections so that they can’t cause any kind of connection issue. Navigate to Start > Control Panel > Network and Sharing Center > Change Adapter Settings. Check if there is any extra connection other than the one you are using.

READ:   How to Fix ERR_NAME_NOT_RESOLVED

–    Try Connecting in Safe Mode

Booting your computer in safe mood and trying to connect will help you determine if any third party software is causing the issue as the safe mode will only load the needed files for windows. Hold down the F8 key. Select Safe mode with networking from the list of options.

Test the connection and if you can connect, then probably any of the third party program is causing the issue like a firewall or antivirus software.

That’s how to How To Solve DNS Server is Not Responding