How to Fix Error Code 0xc00000e9

How to Fix Error Code 0xc00000e9:  This error is usually caused by a failing or bad hard drive. This error actually means that there is a lack of coordination between the hardware and software of the system. Some important hardware might be faulty, or driver might be faulty or perhaps, it might be a general lack of interaction. In most cases it has been observed that the hard drive is the one which is faulty.

How to Fix Error 0xc00000e9

The best preventive measure for such issues is to store a backup of your data on an external hard drive well in advance.
In case the fix does not work, that is the final end of it. You can send the hard drive to a recovery company to recover your data.

BEST FIX: Steps to Fix Error Code 0xc00000e9

Method 1: Disconnect All Peripherals/External Devices
You will have to disconnect all Peripherals and External Devices.
–    Power off your laptop/desktop
–    Take off all the external peripherals connected to the computer such as external hard disk, printer, usb disk, wireless mouse, keyboard etc
–    Leave the monitor plugged in so you can see the status on screen.
–    After all Peripherals disconnected, next step is to power on the system and see if that resolves the issue.
If the error is not resolved, repeat the process by connecting your external devices one by one until you find the one that causes the error.

READ:   How to Fix DNS_PROBE_FINISHED_BAD_CONFIG in Chrome

Method 2: Use Hiren’s BootCD to Check and Fix Disk Errors
Create a bootable cd or a usb to boot our PC with Hirens BootCD.
To carry out this step, we need access to a second computer where we will download HBCD and then burn it to a USB or CD.
Change your BIOS to boot from this CD/USB.
Download Hirens BootCD Download Hiren’s Boot CD By Clicking Here.

READ:   How to Fix DNS_PROBE_FINISHED_NO_INTERNET in Chrome

After download it, open it and extract it to your hard disk, remember where you’ve extracted it. After download, you will need a ISO Burner. Burn it to a CD or a USB using MagicISO or any other software. Once done, put the media in your computer or connect it to it then boot from it, make sure you have changed the boot order in BIOS.

After it has booted up, select the option “Dos Programs”

Error 0xc00000e9

Select Option 6 which is the Hard Disk Tools

Solve Error 0xc00000e9

Next, select option 1 which is HDAT2 4.53 (Test/Repair of Bad Sectors).
12

The disk menu will appear. Select your DISK from the menu. Unable to know which devices is yours, Look at the capacity to know your hard disk.

READ:   How to Fix 0x80070002 Windows Update Error

13

From the Device Test Menu, select “Check and Repair Bad Sectors”

How to Fix Error 0xc00000e9

The repair will process will begin. The process can take several minutes to hours.
After it has finished, set your disk back to what it was in the bios (boot order) and remove  the Hiren’s BootCD media.

Learn How to Fix Error Code 0xc00000e9

Still getting the 0xc00000e9 error then unfortunately the disk has failed and needs to be replaced.